Number
of Spare Rechargeable Batteries supplied with the instrument
0
Battery
Voltage
3.7 Volt
Power
Source
Rechargeable
Battery
Battery
is BIS Approved
Yes
BIS
Registration number for Battery under CRS of MeitY
NA
Display /
Indicator / Storage / Interface
Display
Type
TFT LCD
Record
Memory (Minimum)
50000
Display
Size
2.4 inch
If
yes, Capable to display the geolocation of test inspection / location
NA
GPS
No
Data
Interface
USB
Camera
No
Record
Entry
Through
Alphanumeric Keyboard
Availability
of audible beeper for over range, low battery etc.
Yes
If
yes, Capable to capture the clear image of test target
Yes
Record
Data Downloadable to PC
Yes
Minimum
Record Fields
Full
Information as per the user's requirement such as Driver Name, Vehicle
number, inspector name, test report with time, date, geo-location, instrument
id etc.
Environmental
/ Certification
Name
of the Lab and Address
NA
Conformity
to Dry Heat test at 50 degree C for 16 hours as per IS :9000 latest
Yes
Test
Report Number and Date
NA
Conformity
to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours
as per IS: 9000 latest
Yes
Conformity
to Cold test at - 5 / -10 / - 15 / -20 degree C (as applicable) for 4 hours
as per IS: 9000 latest
Yes
Availability
of Test Reports from Central Govt / NABL approved / ILAC accredited Lab to
prove conformity to the specification
Yes
Operating
Conditions
Maximum
Operating Temperature
50 degree
Celsius
Minimum
Operating Temperature
-10 degree
Celsius
Relative
Humidity Non Condensing (%)
80
Physical
Size
(mm x mm x mm)
200 X 81 X 33
Weight
250 gram
Statutory
Requirements
If
yes, the equipment meets the requirements of the applicable latest Central
Motor Vehicle Rules and all Govt notifications
Yes
Immunity
to RF interface, meets requirement as per EN:5008-/1992(emission) and
EN:50082-1:1997 (immunity) or equivalent
Yes
The
equipment can be used as an evidential instrument for Traffic Law
Enforcement, the instrument is handheld, portable and easy to operate
Yes
Technology
/ Performance
RoHS
Compliant
Yes
Sensor
Technology
Electrochemical
- Fuel Cell (alcohol specific)
Sampling
modes
Both Active and
Passive
Time
required for re-calibration
12 month
Sampling
Error Detection
Alarm on wrong
sampling
Barometric
Pressure Range (hpa or millibar)
600 millibar
Drift
of the breath analyzer in 6 months period (mg / 100 ml BAC)
1
Analytical
Response Time (At '0' level of Alcohol)
3 second
Warm
up Time (after putting on)
10 second
Easily
replaceable mouthpiece with Sputum Trap
Yes
Shelf
Life of Fuel Cell
3 year
Sample
Taking Duration
3 second
Sampling
Method
Deep Lung
Exhalation Method
Measuring
Range [mg / 100 ml BAC (Blood Alcohol Concentration)]